About Us

Established in 1982, our company started manufacturing activities in 1987. In the begininning only Heat Treatment Salts were manufactured however the full range of metal processing chemicals production from 1989, commenced which includes

1 . Heat Treatment Salts & Chemicals
2 . Meprophos Phosphating Chemicals
3 . Meproche Rust Preventives
4.  Meproche Machining Fluids
5 . Meproche Specialty Products
6.  Meproche Electroplating Salts
7.  Meproche Paint Removers
8. Acid/alkali proof cements / high heat resisting cold setting cements (upto 2000 C Degrees)
Many a new products are being developed from time to time hence even if one does not find a requisite product in our website, the enquiry is a welcome  and  we try to provide best suited products.



  Products


Heat Treatment Salts & Chemicals - (A) Preheating Salts / Neutral Hardening Salts

Meproche MN 660 : Working range 660° C to 890° C used as preheating salt for high speed tool steels, selective carbon steels and hot working steel prior to hardening with MEPROCHE 970.

Meproche MN 660 SPL : Working range 660° C to 930° C. Does not allow the formation of oxide film on the jobs. It is compatible with cynide and allows easier absorption of carbon.

Meproche MH 830 : Working range 830° C to 1100° C. Used for hardening of corrosion resisting steels, 2% carbon, 12% chromium tool steels and steels used for cutlery. Sometimes used as alternative to Meproche 970 or 1100 for hot working steels. Use of regenerator is recommended


Meprophos Phosphating Chemicals Meprophos 2614 Z : 


DEGREASERS : 

(I) Meproche 245 : Hot alkaline Degreases. For removal of oil, grease and light rust marks. Working temperature 70 degree C to 80 degree C. 

Scope & Application :- 
Meproche 245 is an alkaline degreaser formulated to remove oil, grease, heavy soils and dirt from the surfaces of ferrous components. It is used prior to phosphating, electroplating, lacquering enameling , etc. The process is carried out by immersion at elevated temperature. (80 -90°C). 

Description & Make-up Parameters:- 
i) Apperarance : Off white powder. 

Chemical Composition : Blend of surface active agents. 

Solubility : Readily soluble in water 

pH of working conc. : 12 - 13 

ii) Concentration to be used : 5 - 10% 

Working Temperature : 80 - 90°C. 

Time of immersion : 5 - 15 min. (varies as per the oil/grease contaminants.) 



Meproche Rust Preventives - (A) SOLVENT TYPES 

a) Meproche B : Solvent based - quick drying - gives waxy film - film thickness 7 to 12 microns - covers 70 to 78 Sq. m. per litre. Easily wipeable.

(b) Meproche 267 : Strong water displacement - fingerprint neutaliser used for indoor application - Coverage 97 to 105 Sq. m. per litre - Gives 7 to 12 micron film thickness - Dries in 1.5 min.


Meproche Machining Fluids (A) OIL TYPES 

(a) Meproche H-60 : Cutting oil - good for hard water - Gives milky emulsion with water - To be used at 4 %        concentration -  Good E. P. properties. Used for drilling, turning, milling, boring etc.

(b) Meproche Antisep 'K' : Specially designed coolant base for grinding bearing races / rings - has high refrigerant       base and is having E. P. additives - Product was specially developed for SKF - Pune.

(c) Meproche Conc Soluble Grinding Fluid : Water thinneable - Semi synthetic - Solution type - Very good 
     bactieria cidal   properties - Good rust preventives - 2% concentration passes IS specification - Used 4% - Mainly      for steel ball manufacturing.

(d) Meproche STG : Transparent grinding coolant - good corrosion inhibitions - Use 2 to 10% depending on application       - Fully Synthetic - water soluble - suitable for centreless grinding, cylindrical and surface grinding.


Meproche Specialty Products -  
(A) MEPROCHE 401 RUST REMOVERS
Slightly acidic liquid - apply on the rusty surface and leave for 2 to 5 minutes- wipe out the rust.
(B) MEPROCHE C-21 
Two pack type rust convertor Mix two components (A) and (B) in a ratio of four to one and apply one the rusted surface. Keep for four to five hours. Remove loose scales by wire brush. If needed the operation is to be repeated for highly pitted surfaces. It will convert the rust into protective film.

Meproche Paint Removers
Meproche Paint stripper is a formulated product, designed to remove paint from steel and other substrates. There are many types and grades in the strippers depending on the type of paint to be removed and the position of the surface (whether it is vertical or horrizontal). Meproche Paint Remover are manufactured as per ISS 430 & 431.

Meproche Paint Remover GP is a general purpose paint remover which can be used in various applications including synthetic enamels, epoxies, powder paints, stoving paints. However for a much efficient removal the exact specifications of the substrate and paint should be given. 

Meproche Electroplating Salts

(1) Meproche Cyanide zinc salt
(2) Meproche Cyanide zinc brighteners
(3) Meproche purifiers
(4) Meproche Passivators - Hot and cold types : post plating protectives like yellow, green, blue, black etc.
(5) Meproche and zinc brighteners

Details of above mention products can be given on request


  Enquiry


* Indicates Compulsory Fields
 

Name of Company : *
Name of Contact Person :*
Address / City / Location : *
Tel. No. / Cell No. : *
Email : *
Requirements Details : *


  Contact Us

Regd.Office : 404, Sai Chambers, 365,  Narshinatha Street, Mumbai - 400009

* Tel. : (022) 30020444 / 23443148 / 66312982
* Fax : (022) 23429663


* Email :
   website : www.deluxemetal.com / www.phosphatingchemicals.net

Factory : 39, Palghar Taluka Industrial Co-operative Estate Ltd., Boisar Road,
                Palghar - 401 404

* Tel. : 02525254782